4 Monostable Relay Outputs
- Change over contacts: 2
-
Normally open contacts: 2
-
Switching voltage: max. 250 VAC, 125 VDC
-
Switching current: max. 8 A (AC and DC)
-
Switching power:
Max. resistive load: 2000 VA / 240 W
Max. inductive load: 875 VA / 170 W -
CANopen profiles acc. to CiA® specification CiA 301 and CiA 401
Approved Reliability and Ease of Use
-
Electrical isolation of relay outputs
-
InRailBus technology combines high ease of use and proven reliability
-
DIN-EN carrier rail mounting (TS 35)
Relay Outputs
The CAN-CBX-REL4 is equipped with 4 relays which are electrically isolated from each other. Therefore various voltages can be applied to the CAN-CBX-REL4 module simultaneously.
CAN Interface and LED Display
The CAN interface is designed according to ISO11898-2 high-speed layer with electrical isolation and supports bit rates up to 1 Mbit/s. The CANopen-node number and the CAN bit rate can be easily set via coding switches. Four LEDs indicate the module and CANopen node status, four additional LEDs indicate the status of the relays.
InRailBus for easy wiring
The power supply and the CAN bus signals can be supplied via the InRailBus connector (TBUS connector) integrated in the mounting rail. In this way, a minimum of cabling of the individual modules is achieved. All setod CBX modules are compatible with each other and can be plugged onto the bus as required. It is also possible to disconnect individual modules from the InRailBus without interrupting the bus signals or the power supply.
Software Support
The CAN-CBX-REL4 comes with CANopen firmware according to CiA 301 and and with a CANopen-I/O profile according to CiA 401.
Do you have special requirements regarding the product?
We are happy to provide you with a customer-specific option or adjustment to our products when purchasing appropiate quantities. Please contact our sales team for detailed information.
With the help of the button "Add to watchlist" you can save articles on your watchlist.
Afterwards, you can request your saved watch list as a quotation via a contact form.
Hardware
CANbloc-X-Module für CANopen 2 Relais with 2x changeover, 60VA, 2 Relais with 2x close, 60VA, max. switching voltage 240VAC, In-Rail-Bus
- CiA 301 compliant
- CiA 401 profile
- galvanically isolated
- CAN
- CANopen Device
- Relay
- CAN-Layer 2
- CANopen
Hardware-Accessories
CAN cable assembly, 0.3 m lenght, 1 x DSUB-9 plug and 3 wire end sleeves, performance level 2, metallised plastic housing
manufactured CAN cable, length 0.3 m, 1 x DSUB-9 socket and 3 wire end sleeves, performance level 3, metallised plastic housing
In-Rail-Bus connector
to connect power supply (24V) and CAN at CBX-In-Rail-Bus. socket type
to connect power supply (24V) and CAN at CBX-In-Rail-Bus. plug type
