PCI Board for up to 4xCAN
- 2x or 4x High-Speed CAN interfaces according to ISO 11898-2
- PCI bus according to PCI Local Bus Specification 2.2
- setod Advanced CAN Core (setodACC) technology
- Bus mastering and local data management by FPGA
- Software drivers for Windows® and Linux® included free of charge
Real-time OS Support and Higher Layer Protocols CANopen, J1939, ARINC825
- Software Drivers for Windows, Linux, VxWorks®, QNX®, RTX, On Time RTOS-32 and others
- CANopen®, J1939 and ARINC 825 protocol libraries are available
Advanced CAN Diagnostics
- Enhanced diagnostic features
- Error Injection capabilities
- High resolution hardware timestamping
Powerful interface for PCs
The CAN-PCI/400 is a PC plug-in card for the PCI bus and supports two (CAN-PCI/400-2) or optionally four (CAN-PCI/400-4) galvanically isolated CAN high-speed interfaces according to ISO11898-2. With the CAN-PCI/400-4, two CAN interfaces are routed via a separate slot bracket.
CAN Data Management
The CAN(-FD) interfaces are controlled by the setodACC (setod Advanced CAN Core) developed by setod and certified according to ISO 16845:2004, which is implemented in an FPGA.
The design includes a bus mastering unit ( first-party DMA ) to exchange the CAN data.
This allows the CAN interface to initiate write cycles to the CPU RAM independently of the host system's CPU or DMA controller. This reduces the CPU load of the host system and the overall system latency.
In addition, the module also supports high-resolution 64-bit hardware timestamps to enable highly accurate reception and transmission of CAN messages.
Error Injection Unit - A simple but powerful concept
For many years, the CAN bus has been used not only in automotive and industrial automation, but increasingly also in safety-critical areas such as medical technology or aerospace. Due to the resulting increase in safety requirements, the need for verification, simulation and testing is also growing.
Due to their principle, the CAN controllers available on the market are not able to send faulty CAN frames or generally violate the CAN standard ISO 11898. The setodACC CAN IP core, supplemented by the Error Injection Unit, is not only able to generate or simulate almost all CAN errors, it can even interactively intervene in the running CAN communication.
The error injection unit has different injection modes, such as CAN arbitration, time triggered or pattern matching, which in combination allow even complex scenarios. With the setodACC Error Injection GUI Tool setod additionally offers a free graphical user interface for the Error Injection Unit.
Free drivers for Windows and Linux included
The product is offered with drivers for Windows and Linux, which can be downloaded free of charge.
In addition to these operating systems, various other (real-time) operating systems are also supported. Detailed information can be found in the description of our order items and, if applicable, in the accessories at the bottom of this page. For more detailed information about the availability of drivers for your operating system, please contact our sales team.
Free CAN tools for fast setup and diagnosis of CAN networks
Our CAN tools for Windows, which are available free of charge in the CAN SDK, significantly support the user in quickly setting up and easily diagnosing CAN, CAN FD and CANopen networks. The possibility of data logging helps the user to record the data traffic for later analysis and to process it further as a CSV file.
NTCAN API and available software stacks
The NTCAN API is a cross-platform software communication interface for CAN and CAN FD hardware. The well-structured API allows easy integration into any application. The functionality and versatility of the implementation provide all necessary mechanisms to control, configure and monitor CAN and CAN FD networks. In addition to the free version for Windows and Linux, the NTCAN API is also available for many real-time operating systems such as QNX®, RTX® or VxWorks® for a license fee.
Many sophisticated functions make the API ideally suited for use in conjunction with higher CAN / CAN FD based protocols. For many common protocols corresponding implementations are already available from setod. These higher layer protocols for Classical CAN, which are available for numerous operating systems, include:
Do you have special requirements regarding the product?
We are happy to provide you with a customer-specific option or adjustment to our products when purchasing appropiate quantities. Please contact our sales team for detailed information.
Documentation
-
CAN-PCI/400 2 or 4 Channel PCI-CAN Interface with setodACC (Layer 2, CANopen, J1939 or ARINC825) Hardware Manual (EN) 889 KB
With the help of the button "Add to watchlist" you can save articles on your watchlist.
Afterwards, you can request your saved watch list as a quotation via a contact form.
Hardware
Active CAN Interface Board for PCI, 2 CAN CAN 2.0A/B-interfaces with setod Advanced CAN IP-Core (setodACC), Physical Layer according ISO 11898, High Speed, galvanically isolated, 2x DSUB-9 Connector, 4x LEDs for CAN- und Board-Status; Drivers, tools and documentation for Windows & Linux on CD-ROM
- Bus-Mastering (DMA-Support)
- setod Advanced CAN Controller (setodACC)
- setod CAN Error Injection
- galvanically isolated
- HW-Timestamp capable
- MSI-IRQ capable
- CAN
- PCI
- Linux
- On Time RTOS-32
- QNX6/7
- VxWorks
- Windows 7/8/10/11
- ARINC825
- CAN-Layer 2
- CANopen
- J1939
Active CAN Interface Board for PCI, 4 CAN CAN 2.0A/B-interfaces, 2xDSUB9 on a separate slot bracket, with setod Advanced CAN IP-Core (setodACC), Physical Layer according ISO 11898, High Speed, galvanically isolated, 2x DSUB-9 Connector, 4x LEDs for CAN- und Board-Status; Drivers, tools and documentation for Windows & Linux on CD-ROM
- Bus-Mastering (DMA-Support)
- setod Advanced CAN Controller (setodACC)
- setod CAN Error Injection
- galvanically isolated
- HW-Timestamp capable
- MSI-IRQ capable
- CAN
- PCI
- Linux
- On Time RTOS-32
- QNX6/7
- VxWorks
- Windows 7/8/10/11
- ARINC825
- CAN-Layer 2
- CANopen
- J1939
Hardware-Accessories
Physical layer ISO 11898 (2xDSUB9), incl. connecting cable, for CAN-PCI/400 und CAN-PCIe/400
- Expansion board
- galvanically isolated
- CAN
Software-Accessories
Single user runtime license for CANopen Software Stack for QNX in connection with setod CAN hardware and NTCAN API. Includes realtime driver, CANopen Manager and Slave. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- QNX4
- QNX6/7
- CANopen
Single user runtime license for CANopen Software Stack for VxWorks in connection with setod CAN hardware and NTCAN API. Includes realtime driver, CANopen Manager and Slave. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- VxWorks
- CANopen
object licence and CD-ROM for QNX 4.x, 6.x and 7.x for setod PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- QNX6/7
- CAN FD-Layer 2
- CAN-Layer 2
object license and CD-ROM On Time RTOS-32 for setod PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals (1xCD-ROM .11 + 1xLizenz-Sticker .44)
- Runtime license
- On Time RTOS-32
- CAN FD-Layer 2
- CAN-Layer 2
object licence and CD-ROM for VxWorks 5.x and 6.x for setod PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- VxWorks
- CAN FD-Layer 2
- CAN-Layer 2
Single-user runtime license for J1939 Software Stack and J1939 Device Simulator & Monitor for use with setod CAN hardware and NTCAN API. Including protocol interpreter plugin for CANreal for decoding and displaying PGNs. Delivered as Windows object code for easy integration into a system.
- Runtime license
- Software Stack
- Windows 7/8/10/11
- J1939
Single-user runtime license for J1939 Software Stack for use with setod CAN hardware and NTCAN API. Provided as Linux object code for easy integration into a system.
- Runtime license
- Software Stack
- Linux
- J1939
Single-user runtime license for J1939 Software Stack for use with setod CAN hardware and NTCAN API. Provided as RTX object code for easy integration into a system.
- Runtime license
- Software Stack
- RTX
- RTX64
- J1939
